CADXChange

RecursosBibliotecas de símbolos DWG

Free AutoCAD brewery, winery and distillery layout symbols (DWG): tanks, stills, presses, taproom

Brewery, winery and distillery layout: 216 blocos prontos de AutoCAD (DWG), de download gratuito e uso nos seus próprios projetos, em ZIP ou um símbolo por vez.

216 blocks at real size for craft brewery, winery and distillery layouts: brewhouse and grain handling (mash lauter tuns, brew kettles, whirlpools, liquor tanks from 5 to 50 hL, malt mills, grist cases, hoppers, augers, silos, hop stores); fermentation and cellar tanks (fermenters and bright tanks from 5 to 120 hL, unitanks, horizontal tanks, open fermenters, coolships, foeders, barrels, plate and kieselguhr filters, centrifuges); winery crush, press and barrels (receiving hoppers, destemmers, sorting tables, pneumatic and basket presses, bins, wine tanks, concrete eggs, amphorae, barrel racks, bottling machines, crush pad); distillery stills and spirit handling (pot stills from 300 to 5000 L, wash still with doubler, column stills, receivers, spirit safes, washbacks, cooling tower, totes, cask and dunnage racks, flameproof pumps); packaging and kegs (canning and bottling lines, labelers, pasteurizer, case packer, wrappers, kegs, keg pallets, keg washers and fillers, growler station); utilities and floor services (glycol chillers, boilers, CIP skids, water treatment, compressors, CO2 and nitrogen, drains, sinks, forklift, pallet racking, platforms); taproom and tasting room (bars, tap walls, tables, stools, booths, stage, food truck bay); and zones, routes and markers (hot and cold side, wet and dry areas, bonded area, explosive atmosphere zones, bund, flow arrows for beer, wine, spirit, CIP, glycol and steam, control points)

Baixar ZIPVer no navegador

Usa o AutoCAD 2017 ou uma versão anterior? Baixar o formato 2010

Copyright CADXChange. Use e modifique os símbolos livremente nos seus desenhos e projetos, inclusive comerciais; crédito e link só são necessários se você os publicar. Não redistribua nem revenda a biblioteca. Cada ZIP contém um arquivo DWG simples no formato do AutoCAD 2018 e um README; não é preciso nenhum plug-in. Fornecido no estado em que se encontra, sem garantia. Termos da biblioteca (CXL-1.0)

Bibliotecas de símbolos relacionadas

Todos os 216 símbolos

216 de 216 símbolos

Faltou um símbolo? Diga qual.

Atributos para listas de materiais

Every block carries a tag you can number and invisible attributes for the equipment list. A vessel holds ITEM_TYPE, SIZE, CAPACITY_HL, MATERIAL, DESIGN_PRESSURE_BAR and JACKETED; a machine holds SIZE, POWER_KW, FLOW_M3H and MATERIAL; furniture and markers hold ITEM_TYPE and SIZE. Manufacturer, model, quantity and remarks are on every equipment block.

Export the blocks of a layout to Excel with BlockSync to get an equipment list with tank capacities, powers and quantities, check the tags and write the corrections back in one run, with preview and backup.

Como usar a biblioteca

  1. Unzip the file and open the DWG. Copy the symbols you need into your plan, or drag the blocks in from DesignCenter (ADCENTER).
  2. The blocks are drawn at real size in millimetres, 1 drawing unit = 1 mm. If your drawing is in metres, insert them with a scale of 0.001. A 20 hL fermenter is 1250 mm across on the plan, a pallet rack bay 2700 x 1100.
  3. Vessels are drawn from above and centred on their middle, so you snap them onto a grid of tank centres. Rectangular equipment is centred with its operating side towards the bottom of the drawing. The names carry the capacity in hectolitres and the diameter or footprint in millimetres, so a size can be read without opening the block.
  4. Zones are dashed outlines without any fill: hot and cold side, wet and dry areas, a bonded area, explosive atmosphere circles of 1 and 3 m, a bund and a maintenance clearance. Put them on their own layer and switch them off for the plot. Flow arrows show beer, wine, spirit, CIP, glycol, steam and grain.

About the drawings

There is no standard for the drawings of brewery, winery and distillery layouts. The blocks follow the common practice of production drawings: a tank as a circle with its manway and outlet, a still as a pot with its condenser, a rotary filler as a ring of heads.

The blocks are our own drawings, not copies, and the library is not certified. The sizes are common planning values for craft producers; fire, explosive atmosphere, excise, bonded storage and food hygiene rules depend on your local authority, so check them and the data sheet of the equipment you specify.

Perguntas frequentes

Can I use the blocks in a drawing in metres?
Yes. The blocks are in millimetres, so insert them with a scale of 0.001 (or set the block unit conversion); a 1250 mm fermenter then measures 1.25 units on a drawing in metres. In a drawing in millimetres they come in at 1:1.
Which tank sizes are included?
Fermenters and bright tanks from 5 to 120 hL, mash lauter tuns and kettles from 5 to 50 hL, liquor tanks of 10 and 30 hL, horizontal tanks of 20, 50 and 100 hL, wine tanks from 10 to 200 hL, pot stills from 300 to 5000 L, and silos of 2000, 2500 and 3000 mm.
Can I use the symbols in commercial projects?
Yes. They are free to use and modify in your own projects, including commercial ones. They are provided as is, without warranty. Please do not redistribute or resell the library; see the library terms.
Is the library only for large plants?
No. The sizes start at a 5 hL pilot brewhouse and a 300 L pot still and go up to mid-size production, which fits craft breweries, small wineries and craft distilleries, with the taproom or cellar door in the same drawing.
Can I change a symbol or add attributes?
Yes. Open the DWG, edit a block with BEDIT to change it or add attributes, and save. To update drawings that already contain the block, run ATTSYNC or replace the block. Make a backup first: attribute values can be lost if ATTSYNC is used carelessly.
Onde encontro um conjunto pronto destes símbolos para o AutoCAD?
O AutoCAD traz só uns poucos blocos de exemplo, então um conjunto completo de símbolos precisa vir de uma biblioteca. Baixe o ZIP desta página e abra o DWG: cada símbolo é um bloco. Insira um com o comando INSERT (paleta Blocos, guia Bibliotecas, depois escolha o DWG) ou arraste-o do DesignCenter (ADCENTER). Também é possível baixar um símbolo isolado.