Free kitchen and bathroom cabinet blocks for AutoCAD (DWG): base, wall and tall units, vanities, layouts, details

About the sizes

Kitchen and bathroom furniture is not standardised, so the blocks use the modular sizes that most makers list: units 300 to 1200 mm wide and 600 mm deep, worktops at 900 mm, wall units 320 mm deep, tall units 2150 mm, vanities 460 mm deep. Your manufacturer's catalogue may differ by a few millimetres, so check it before you order.

The blocks are our own drawings, not copies of any catalogue, and the library is not certified. They are meant to plan the arrangement and to produce a schedule, not to prove that a room meets building, accessibility or appliance-installation rules. Take clearances, ventilation and distances to fixtures from the rules that apply to your project.

Frequently asked questions

Which items are in the library?

Base, wall and tall units in plan and front view, worktops and islands, six kitchen layouts, bathroom vanities and tall units, eight bathroom layouts, section and edge details, handles, clearance zones and 3 markers. The page above lists every group with its count.

Can I change the width of a unit?

Yes. The common widths are included as separate blocks; for another width, explode the block and stretch the outline, or put filler panels next to a standard unit. Remember to update the CODE and SIZE attributes so that the schedule stays correct.

Can I use the symbols in commercial projects?

Yes. They are free to use and modify in your own projects, including commercial ones. They are provided as is, without warranty.

Does it show that a room meets building rules?

No. The blocks help you draw and count; they do not check anything. Clearances, ventilation and distances depend on your building and your local rules, so take them from the rules that apply.

Can I change a symbol or add attributes?

Yes. Open the DWG, edit a block with BEDIT to change it or add attributes, and save. To update drawings that already contain the block, run ATTSYNC or replace the block. Make a backup first: attribute values can be lost if ATTSYNC is used carelessly.

Where do I find a ready-made set of these symbols for AutoCAD?

AutoCAD itself ships only a small set of sample blocks, so a full symbol set has to come from a library. Download the ZIP on this page and open the DWG: every symbol is a block. Insert one with INSERT (Blocks palette, Libraries tab, then pick the DWG) or drag it from DesignCenter (ADCENTER). You can also download a single symbol on its own.