批次重新命名圖塊

純文字，沒有任何隱藏內容。複製後存成名為 cxblkren.lsp 的檔案，或直接下載。

;;; ============================================================================
;;; CXBLKREN - Rename blocks in bulk
;;; Version 1.0.0
;;; CADXChange LISP tools - https://cadxchange.net/resources/lisp/cxblkren
;;; Tested in: AutoCAD (full version). Other programs that run AutoLISP may work but are not tested.
;;; Copyright (c) CADXChange. Free for personal and commercial use; do not resell or
;;; republish it as a collection. Terms: https://cadxchange.net/legal/lisp-terms
;;; ============================================================================

;; Rename block definitions whose name matches PATTERN (wildcards, any case). The new name is
;; PREFIX + the old name with FIND replaced by REPL (FIND "" changes nothing) + SUFFIX.
;; A name that already exists, or that holds a character a block name cannot have, is skipped.
;; Returns ((old . new) ...) for the renamed blocks and the number of skipped ones: (renamed skipped).
(defun cx:blkren-run (pattern find repl prefix suffix / done skipped new bad)
  (setq skipped 0)
  (foreach name (cx:block-names)
    (if (wcmatch (strcase name) (strcase pattern))
      (progn
        (setq new (strcat prefix (if (/= find "") (cx:replace-ci name find repl) name) suffix)
              bad nil)
        (foreach ch '("<" ">" "/" "\\" "\"" ":" ";" "?" "*" "|" "," "=" "`")
          (if (cx:find new ch 1) (setq bad T)))
        (cond
          ((= new name) nil)
          ((or bad (= new "") (and (tblsearch "BLOCK" new) (/= (strcase new) (strcase name))))
           (setq skipped (1+ skipped)))
          (T
           (command "_.-RENAME" "_Block" name new)
           (setq done (cons (cons name new) done)))))))
  (list (reverse done) skipped))

(defun c:CXBLKREN ( / *error* cx:sv pattern find repl prefix suffix r)
  (setq *error* cx:err)
  (princ (strcat "\nBlocks in this drawing: " (cx:join (cx:block-names) ", ")))
  (setq pattern (cx:ask-str "Rename the blocks named (wildcards allowed)" "*")
        find    (cx:ask-str "Find in the name (- for nothing)" "")
        repl    (if (/= find "") (cx:ask-str "Replace with (- for nothing)" "") "")
        prefix  (cx:ask-str "Add in front (- for nothing)" "")
        suffix  (cx:ask-str "Add at the end (- for nothing)" ""))
  (cx:start '(("CMDECHO" . 0)))
  (setq r (cx:blkren-run pattern find repl prefix suffix))
  (foreach p (car r) (princ (strcat "\n" (car p) " -> " (cdr p))))
  (princ (strcat "\n" (itoa (length (car r))) " block(s) renamed"
                 (if (> (cadr r) 0) (strcat ", " (itoa (cadr r)) " skipped (name taken or not allowed)") "") "."))
  (cx:end)
  (princ))


;;; ---- Shared helpers (used by the command above; identical in every CADXChange tool) ----

;; 1-based position of SUB in STR at or after START, or nil.
(defun cx:find (str sub start / n i r)
  (setq n (strlen sub) i start r nil)
  (if (> n 0)
    (while (and (not r) (<= i (1+ (- (strlen str) n))))
      (if (= (substr str i n) sub) (setq r i))
      (setq i (1+ i))))
  r)

(defun cx:dxf (code ed)
  (cdr (assoc code ed)))

;; The names of the block definitions that can be inserted (no anonymous or xref blocks).
(defun cx:block-names (/ r out)
  (setq r (tblnext "BLOCK" T))
  (while r
    (if (and (/= (substr (cx:dxf 2 r) 1 1) "*") (not (cx:find (cx:dxf 2 r) "|" 1)))
      (setq out (cons (cx:dxf 2 r) out)))
    (setq r (tblnext "BLOCK")))
  (reverse out))

;;; Helpers that draw small things: labels and markers. See helpers.lsp for the format.

;; Replace every OLD in STR by NEW, ignoring case.
(defun cx:replace-ci (str old new / n out pos up uo)
  (setq n (strlen old) out "" pos 1 up (strcase str) uo (strcase old))
  (if (= n 0)
    str
    (progn
      (while (<= pos (1+ (- (strlen str) n)))
        (if (= (substr up pos n) uo)
          (setq out (strcat out new) pos (+ pos n))
          (setq out (strcat out (substr str pos 1)) pos (1+ pos))))
      (strcat out (substr str pos)))))

;; Close the undo step and put the system variables back.
(defun cx:end ()
  (foreach v cx:sv (setvar (car v) (cdr v)))
  (command "_.UNDO" "_End")
  (setq cx:sv nil)
  (princ))

;; Error handler: restores everything, stays quiet on Esc.
(defun cx:err (msg)
  (if (> (getvar "CMDACTIVE") 0) (command))
  (cx:end)
  (if (and msg (not (wcmatch (strcase msg) "*BREAK*,*CANCEL*,*EXIT*")))
    (princ (strcat "\nError: " msg)))
  (princ))

(defun cx:join (lst delim / out)
  (setq out "")
  (foreach s lst
    (setq out (if (= out "") s (strcat out delim s))))
  (if lst out ""))

;; Ask for a string (spaces allowed) with a default; "-" means an empty string.
(defun cx:ask-str (msg def / v)
  (setq v (getstring T (strcat "\n" msg " <" def ">: ")))
  (cond ((= v "") def) ((= v "-") "") (T v)))

;; Save the system variables in VARS ((name . value) ...), set them, and open one undo step.
;; The caller declares cx:sv as a local so the saved values live exactly as long as the command.
(defun cx:start (vars)
  (setq cx:sv (mapcar (function (lambda (v) (cons (car v) (getvar (car v))))) vars))
  (command "_.UNDO" "_Begin")
  (foreach v vars (setvar (car v) (cdr v)))
  (princ))

(princ "\nCXBLKREN loaded. Type CXBLKREN to start.")
(princ)

更多指令：圖塊與屬性

• CXATTFILL批次填寫多個圖塊的同一個屬性
• CXATTNUM給圖塊屬性連續編號
• CXATTCOPY把一個圖塊的屬性值複製給其他圖塊
• CXATTVIS批次顯示或隱藏圖塊屬性
• CXBLKCOUNT按名稱統計圖塊數量
• CXBLKREPL用另一個圖塊取代所選圖塊
• CXBLKXP分解圖塊並保留屬性文字
• CXBLKSEL按名稱或屬性值選擇圖塊
• CXBLKAT在許多位置一次插入圖塊