Free hospital and healthcare layout blocks for AutoCAD (DWG): beds, theatre, imaging, ward, laboratory, gas outlets

About the dimensions

Hospital layouts are governed by national guidance and room data sheets, not by a drawing standard, so the blocks use typical dimensions of common equipment classes: a 2100 x 950 mm ward bed, a 2000 x 550 mm operating table, a 1.5 T MRI with a 0.5 mT line, 1.8 m double doors and a 1.4 m bed door. The real footprint and the service clearance differ between products; take them from the data sheet of the product that is bought.

The blocks are our own drawings, not copies of any manufacturer's catalogue, and the library is not certified. They help to arrange rooms, count equipment and check space on a drawing; they do not show that a layout meets a health building guideline, an infection control rule, radiation shielding or fire requirements. Clearances, zones and the fringe field line come from your guidance and the equipment data.

Frequently asked questions

Which items are in the library?

Beds and seating, examination and treatment, operating theatre, ward and critical care, imaging and diagnostics, laboratory and pharmacy, reception and support, medical gas and services, and layout markers. The page above lists every group with its count.

Can I show the clearance around a bed or a scanner?

Yes. The bed space blocks come with the clearance zone drawn as a dashed outline, the operating table has its sterile zone, and the MRI blocks have the fringe field line. Check the values against your guidance and the scanner's site planning data and adjust the outline in your drawing.

Can I use the symbols in commercial projects?

Yes. They are free to use and modify in your own projects, including commercial ones. They are provided as is, without warranty.

Can I use these blocks for an equipment list?

Yes. Each block carries ROOM_NO, MANUFACTURER, MODEL and QTY attributes, and the attributes of its class, so exporting the plan with BlockSync gives a list with the quantities counted from the drawing. Fill in the attributes when you place the item.

Can I change a symbol or add attributes?

Yes. Open the DWG, edit a block with BEDIT to change it or add attributes, and save. To update drawings that already contain the block, run ATTSYNC or replace the block. Make a backup first: attribute values can be lost if ATTSYNC is used carelessly.

Where do I find a ready-made set of these symbols for AutoCAD?

AutoCAD itself ships only a small set of sample blocks, so a full symbol set has to come from a library. Download the ZIP on this page and open the DWG: every symbol is a block. Insert one with INSERT (Blocks palette, Libraries tab, then pick the DWG) or drag it from DesignCenter (ADCENTER). You can also download a single symbol on its own.