CADXChange

KaynaklarDWG sembol kütüphaneleri

Free AutoCAD Taiwan interior design symbols (DWG): system cabinets, wardrobes, bathrooms, sunken slab

Taiwan interior design: kendi projelerinizde ücretsiz indirip kullanabileceğiniz 197 hazır AutoCAD bloğu (DWG); ZIP olarak ya da tek tek sembol olarak.

197 blocks at real size in plan view for Taiwanese homes and offices: system cabinets in the usual modules (base units from 300 to 1200 mm with doors or drawers, sink, hob and dishwasher bases, corner units, tall oven and pantry cabinets, refrigerator spaces, wall cabinets, hoods, islands, peninsulas and counters); wardrobes and closets (sliding and hinged doors, open rails, corner and bridge wardrobes, walk-in closets, shoe and entry cabinets); beds from 3 to 7 ft, bunk beds, cots, bedside tables, dressing tables and chests of drawers; showers with pivot, sliding, fixed and curtain fronts, with or without a sunken slab, rain and hand showers, bathtubs, washing machines, dryers, laundry sinks and water heaters; toilets, bidet seats, vanities, basins, drains, towel rails, exhaust fans and grab bars; sofas, tea tables with a sink, TV cabinets and TV walls, altar tables with offering tables, display cabinets and tatami rooms; mahjong, dining, round banquet, desk, bookcase, meeting and reception furniture; and slab and building marks: sunken slab areas for bathrooms, kitchens, balconies and laundries, raised floors, steps, level marks, beams above, columns, shear walls, pipe shafts, air conditioner ledges, lifts and orientation marks

ZIP'i indirTarayıcıda önizle

AutoCAD 2017 veya daha eski bir sürüm mü kullanıyorsunuz? 2010 biçimini indirin

Telif hakkı CADXChange. Sembolleri kendi çizimlerinizde ve projelerinizde, ticari olanlar dahil, serbestçe kullanıp düzenleyebilirsiniz; atıf ve bağlantı yalnızca bunları yayımladığınızda gerekir. Lütfen kütüphaneyi yeniden dağıtmayın ya da satmayın. Her ZIP'te AutoCAD 2018 biçiminde tek bir DWG dosyası ve bir README bulunur; ek bir eklenti gerekmez. Olduğu gibi, garanti verilmeden sunulur. Kütüphane koşulları (CXL-1.0)

İlgili sembol kütüphaneleri

Tüm 197 sembol

197 sembolün 197 tanesi

Bir sembol mü eksik? Hangisi olduğunu bize yazın.

Malzeme listeleri için öznitelikler

Every block carries a tag you can number and invisible attributes for the schedule. A cabinet or piece of furniture holds ITEM_TYPE, SIZE, MATERIAL, FINISH, QTY, MANUFACTURER, MODEL and REMARKS; a sanitary item adds ROUGH_IN_MM for the drain or supply position; a slab or building mark holds ITEM_TYPE, SIZE, LEVEL_MM, LOCATION and REMARKS.

Export the blocks of a fit-out plan to Excel with BlockSync to list cabinets, sanitary ware and furniture as a schedule for the quotation, check the quantities against the contract and write the changes back in one run, with preview and backup.

Kütüphane nasıl kullanılır

  1. Unzip the file and open the DWG. Copy the symbols you need into your plan, or drag the blocks in from DesignCenter (ADCENTER).
  2. The blocks are drawn at real size in millimetres, 1 drawing unit = 1 mm, so a 600 x 600 base cabinet is 600 x 600 units on the plan. The usual modules are used: base cabinets 600 deep, wall cabinets 350 deep, sliding wardrobes 600 deep, hinged wardrobes 550 deep, and beds in the Taiwanese foot sizes 3, 3.5, 5, 6 and 7 ft (910, 1050, 1520, 1820 and 2130 mm wide, 1880 mm long).
  3. The front of a cabinet, with its doors and drawers, is towards -Y and the back stands on the wall at +Y, so you insert it with the back to the wall and rotate by 90 degrees for the other walls. Door swings are thin arcs. Items above the cut plane, such as wall cabinets, hoods, beams and mirror cabinets, are dashed, so base and wall units can sit on the same spot.
  4. A sunken slab (降板) is shown as a dashed outline with two diagonals and a drain circle; put the depth, for example -150, in the LEVEL_MM attribute. Showers, tubs and drains are separate blocks so that you can place the sunken slab first and arrange the fittings inside. Scale the slab blocks to your room.

About the drawings

There is no standard for interior fit-out symbols in Taiwan. The blocks follow the common drawing practice of Taiwanese interior design offices and system cabinet makers: cabinets as outlines with a door line and swing, wall units dashed, sanitary ware as outlines with its bowl or tray, sunken slabs as dashed areas.

The blocks are our own drawings, not copies, and the library is not certified. The sizes are typical modules and furniture sizes; the real size depends on the maker and on your site, so check every part against the catalogue of the product you specify and your local building and fire rules.

Sık sorulan sorular

Does the library include the sunken slab (降板)?
Yes. There are sunken slab areas for a bathroom, a shower, a balcony, a kitchen and a laundry, a raised floor, a step and a threshold, and two shower blocks that show the sunken area around the tray. The depth goes into the LEVEL_MM attribute.
Which bed sizes are included?
The Taiwanese foot sizes: single 3 ft (910 x 1880), single large 3.5 ft (1050), double 5 ft (1520), double large 6 ft (1820) and king 7 ft (2130), plus a 6 ft bed with a headboard cabinet, a bunk bed, a child bed and a cot, with bedside tables and dressing tables.
Can I use the symbols in commercial projects?
Yes. They are free to use and modify in your own projects, including commercial ones. They are provided as is, without warranty. Please do not redistribute or resell the library; see the library terms.
How are wall cabinets and beams shown?
Everything above the cut plane is drawn with a dashed outline: wall cabinets, hoods, floating shelves, mirror cabinets, beams and indoor air conditioner units. This way a base cabinet and the wall cabinet above it can be placed on the same spot and still be read separately.
Can I change a symbol or add attributes?
Yes. Open the DWG, edit a block with BEDIT to change it or add attributes, and save. To update drawings that already contain the block, run ATTSYNC or replace the block. Make a backup first: attribute values can be lost if ATTSYNC is used carelessly.
AutoCAD için bu sembollerin hazır bir setini nereden bulabilirim?
AutoCAD yalnızca az sayıda örnek blokla gelir; tam bir sembol seti için bir kütüphane gerekir. Bu sayfadaki ZIP'i indirip DWG dosyasını açın: her sembol bir bloktur. Bir sembolü INSERT komutuyla (Bloklar paleti, Kütüphaneler sekmesi, ardından DWG'yi seçin) ekleyebilir ya da DesignCenter'dan (ADCENTER) sürükleyebilirsiniz. Tek bir sembolü ayrı olarak da indirebilirsiniz.