RecursosSímbolos de planta baixaCommercial kitchen layouts
Bistro kitchen, 60 seats
L-shaped kitchen with walk-in freezer and cooler, dry store, a cooking line under two hoods, a preparation island, a heated pass and a dish line.
Grátis para usar e modificar nos seus próprios projetos, inclusive comerciais. O ZIP traz o desenho de exemplo, um modelo, uma tabela de estilos de plotagem e um README; não precisa de nenhum add-in. Os dados do desenho são inventados, então ele não serve para projeto nem para obra. Fornecido como está, sem garantia. Library terms (CXL-1.0)
Versão 1.0 · atualizada em 29 de outubro de 2026
Este exemplo usa estes recursos
Os símbolos são blocos das nossas próprias bibliotecas, com os atributos preenchidos. A folha e o carimbo vêm do nosso modelo de carimbo ISO A3. Baixe-os para desenhar os seus próprios esquemas.
Modelos de carimbo (ISO A3 e mais)Moldura e carimbo deste exemplo
Restaurant and retail layout symbols24 dos seus símbolos são usados aqui
Architectural plan symbols6 dos seus símbolos são usados aqui
Drawing marks, site, services and accessibility symbols3 dos seus símbolos são usados aqui
Door and window symbols3 dos seus símbolos são usados aqui
Layers, styles and sheet setup are the same for every drawing in the series; they are described on the series page: Commercial kitchen layouts
Campos do carimbo
Os atributos do carimbo. Dê dois cliques nele para preenchê-los, ou grave-os em um conjunto inteiro de desenhos com o BlockSync.
| Atributo | Campo na folha | Valor neste exemplo |
|---|---|---|
| COMPANY | COMPANY | CADXChange |
| PROJECT | PROJECT | Bistro Verde Kitchen |
| AREA | AREA | Ground floor |
| SYSTEM | SYSTEM | Architecture |
| CLIENT | CLIENT | Sample |
| TITLE | DRAWING TITLE | Commercial kitchen layout, 60-seat bistro kitchen |
| DRAWING_NO | DRAWING NO. | A-861 |
| CONTRACT_NO | CONTRACT NO. | — |
| REV | REV | A |
| DRAWN | DRAWN | — |
| CHECKED | CHECKED | — |
| APPROVED | APPROVED | — |
| DATE | DATE | 2026-10-29 |
| SCALE | SCALE | 1:75 |
| SHEET | SHEET | 1 |
| SHEET_OF | OF | 1 |
Tabela de revisões: R1 a R4, cada uma com REV, DATA, DESCRIÇÃO e POR (16 atributos, vazios neste exemplo).
Blocos no desenho
A lista de equipamentos do desenho: nome do bloco, símbolo e quantas vezes foi inserido. O BlockSync exporta essa mesma lista a partir dos seus próprios desenhos.
| Símbolo | Bloco | Inseridos |
|---|---|---|
 Floor drain 300 | RRT_FLOOR_DRAIN | 3 |
 Range, 6 burners 900 x 800 | RRT_RANGE_6 | 2 |
 Convection oven 900 x 800 | RRT_CONVECTION_OVEN | 2 |
 Hand wash basin 400 x 400 | RRT_HAND_SINK | 2 |
 Door, double swing, 1200 | ARCH_DOOR_DOUBLE_1200 | 1 |
 Door, single swing, 1000 | ARCH_DOOR_SINGLE_1000 | 1 |
 Door, double acting, 900 | ARCH_DOOR_DOUBLE_ACTING | 1 |
 Walk-in freezer 2400 x 2400 | RRT_WALKIN_FREEZER_24 | 1 |
 Walk-in cooler 1800 x 1800 | RRT_WALKIN_COOLER_18 | 1 |
 Wire shelf 72 x 24 in | RRT_WIRE_SHELF_1830_24 | 1 |
 Roll cage 800 x 700 | RRT_ROLL_CAGE | 1 |
 Mop sink 700 x 700 | RRT_MOP_SINK | 1 |
 Fryer, 3 baskets 1200 x 800 | RRT_FRYER_3 | 1 |
 Griddle 900 x 800 | RRT_GRIDDLE_900 | 1 |
 Chargrill 900 x 800 | RRT_CHARGRILL_900 | 1 |
 Extraction hood 4800 x 1200 | RRT_HOOD_4800 | 1 |
 Extraction hood 1800 x 1200 | RRT_HOOD_1800 | 1 |
 Trench drain 2000 x 200 | RRT_TRENCH_DRAIN | 1 |
 Prep table 2400 x 700 | RRT_PREP_2400 | 1 |
 Prep table, sink 1200 x 700 | RRT_PREP_SINK_1200 | 1 |
 Prep fridge 2000 x 800 | RRT_PREP_FRIDGE_2000 | 1 |
 Planetary mixer 600 x 700 | RRT_MIXER | 1 |
 Heat lamp pass 2400 x 800 | RRT_HEAT_LAMP_PASS_2400 | 1 |
 Dish table, clean 1800 x 700 | RRT_DISH_TABLE_CLEAN | 1 |
 Conveyor dishwasher 2200 x 800 | RRT_DISHWASH_CONV | 1 |
 Dish table, soiled 1800 x 700 | RRT_DISH_TABLE_SOILED | 1 |
 Waste bin 600 x 600 | RRT_WASTE_BIN | 1 |
 Room tag | ARCH_TAG_ROOM | 1 |
 North arrow | ARCH_NORTH_ARROW | 1 |
 Scale bar, 5 m | ARCH_SCALE_BAR | 1 |
Lista de equipamentos
Uma linha por símbolo inserido, lida dos atributos dos blocos do desenho: o que aparece na folha e os atributos da lista que foram preenchidos mas não aparecem. O BlockSync exporta esses mesmos atributos a partir dos seus próprios desenhos.
| Tag | Descrição | Mostrado na folha | Preenchido, não mostrado |
|---|---|---|---|
| D1 | Door, double swing, 1200ARCH_DOOR_DOUBLE_1200 | WIDTH_MM = 1200HEIGHT_MM = 2100DOOR_TYPE = Delivery doorMATERIAL = TimberFIRE_RATING = NoneFINISH = PaintedHARDWARE_SET = HS-1 | |
| D3 | Door, single swing, 1000ARCH_DOOR_SINGLE_1000 | WIDTH_MM = 1000HEIGHT_MM = 2100DOOR_TYPE = Rear exitMATERIAL = TimberFIRE_RATING = NoneFINISH = PaintedHARDWARE_SET = HS-1 | |
| D2 | Door, double acting, 900ARCH_DOOR_DOUBLE_ACTING | WIDTH_MM = 900HEIGHT_MM = 2100DOOR_TYPE = Double-acting doorMATERIAL = TimberFIRE_RATING = NoneFINISH = PaintedHARDWARE_SET = HS-1 | |
| 1 | Walk-in freezer 2400 x 2400RRT_WALKIN_FREEZER_24 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 2 | Walk-in cooler 1800 x 1800RRT_WALKIN_COOLER_18 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 3 | Wire shelf 72 x 24 inRRT_WIRE_SHELF_1830_24 | MATERIAL = TimberFINISH = Oiled oakQTY = 1 | |
| 4 | Roll cage 800 x 700RRT_ROLL_CAGE | MATERIAL = TimberFINISH = Oiled oakQTY = 1 | |
| 5 | Mop sink 700 x 700RRT_MOP_SINK | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 6 | Fryer, 3 baskets 1200 x 800RRT_FRYER_3 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 7 | Range, 6 burners 900 x 800RRT_RANGE_6 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 7 | Range, 6 burners 900 x 800RRT_RANGE_6 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 8 | Griddle 900 x 800RRT_GRIDDLE_900 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 9 | Chargrill 900 x 800RRT_CHARGRILL_900 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 10 | Convection oven 900 x 800RRT_CONVECTION_OVEN | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 10 | Convection oven 900 x 800RRT_CONVECTION_OVEN | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 11 | Extraction hood 4800 x 1200RRT_HOOD_4800 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 12 | Extraction hood 1800 x 1200RRT_HOOD_1800 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 13 | Trench drain 2000 x 200RRT_TRENCH_DRAIN | MATERIAL = TimberFINISH = Oiled oakQTY = 1 | |
| 14 | Prep table 2400 x 700RRT_PREP_2400 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 15 | Prep table, sink 1200 x 700RRT_PREP_SINK_1200 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 16 | Prep fridge 2000 x 800RRT_PREP_FRIDGE_2000 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 17 | Planetary mixer 600 x 700RRT_MIXER | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 18 | Heat lamp pass 2400 x 800RRT_HEAT_LAMP_PASS_2400 | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 19 | Hand wash basin 400 x 400RRT_HAND_SINK | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 19 | Hand wash basin 400 x 400RRT_HAND_SINK | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 20 | Floor drain 300RRT_FLOOR_DRAIN | MATERIAL = TimberFINISH = Oiled oakQTY = 1 | |
| 20 | Floor drain 300RRT_FLOOR_DRAIN | MATERIAL = TimberFINISH = Oiled oakQTY = 1 | |
| 20 | Floor drain 300RRT_FLOOR_DRAIN | MATERIAL = TimberFINISH = Oiled oakQTY = 1 | |
| 21 | Dish table, clean 1800 x 700RRT_DISH_TABLE_CLEAN | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 22 | Conveyor dishwasher 2200 x 800RRT_DISHWASH_CONV | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 23 | Dish table, soiled 1800 x 700RRT_DISH_TABLE_SOILED | MATERIAL = Stainless steelFINISH = BrushedQTY = 1 | |
| 24 | Waste bin 600 x 600RRT_WASTE_BIN | MATERIAL = TimberFINISH = Oiled oakQTY = 1 |
Fabricante, modelo e observações ficam vazios em todos os blocos, prontos para os seus dados. Os valores são exemplos.
